Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Announcements (http://www.haynes.co.uk/forums/forumdisplay.php?f=2)
-   -   Smashing service from saturn yet again (http://www.haynes.co.uk/forums/showthread.php?t=6569)

carlknight1982 31st May 2011 03:38 PM

Smashing service from saturn yet again
 
Due to my own incompetience i managed to fluff up my side panel to rear tub joints. i rang Andy @ saturn to ask him what he thought the best solution would be, next thing i know hes taking my address down to send me some rubber covering thats just the ticket. all FOC.

Cant say better than that, and its not the first time hes done this either he previously sent me down a pair of adjuster lock nuts as id lost mine. again FOC


I just thought i would let you guys know (especially the noobs) what spot on service they are providing.

SeriesLandy 31st May 2011 04:39 PM

I'm not the only one to mess that join up then. 1 of mine was perfect the other was to small by 6mm

twinturbo 31st May 2011 05:33 PM

Something else for me to cock up then :)

TT

David_17 31st May 2011 09:14 PM

Got a pic of the trim? I used white silicone in mine, but still not happy with it - looks a mess :rolleyes:

Also, I'll second how good Andy at Saturn is ;)

shh120m 1st June 2011 08:29 PM

il third that!

I did the same thing as david, by running over my nosecone, a quick trip to saturn and it was fixed in an hour.

Richard Dryden 1st June 2011 10:48 PM

Add my name to that too top bloke

Davidbolam 2nd June 2011 04:38 PM

I would also like to say that you get really good service from Andy at Saturn. I have been over there a few times and on both occasions with a big list of questions and have found him really helpfull. I am just waiting for him to launch the MX5 based car and I will be paying my deposit!!

spud69 2nd June 2011 05:32 PM

Quote:

Originally Posted by Davidbolam (Post 59587)
I would also like to say that you get really good service from Andy at Saturn. I have been over there a few times and on both occasions with a big list of questions and have found him really helpfull. I am just waiting for him to launch the MX5 based car and I will be paying my deposit!!

I know David, you keep pestering me with e-mails........:D Only joking though of course.

Plans are about at fruition now and, nearly completed, build plans for Mx-5 can go out soon, a different project has taken priority over Mx-5 which means that the Mx-5 based car, parts and build plans can be put out as soon as the plans are complete. If that makes sense - all will be clear soon.....;) Just need to hone my skills on Autodesk Inventor again.

Thanks All.....Andrew

twinturbo 2nd June 2011 10:04 PM

Quote:

Originally Posted by spud69 (Post 59588)
I know David, you keep pestering me with e-mails........:D Only joking though of course.

Plans are about at fruition now and, nearly completed, build plans for Mx-5 can go out soon, a different project has taken priority over Mx-5 which means that the Mx-5 based car, parts and build plans can be put out as soon as the plans are complete. If that makes sense - all will be clear soon.....;) Just need to hone my skills on Autodesk Inventor again.

Thanks All.....Andrew

Awww Come on!!! you can't tease us like that!

TT


All times are GMT +1. The time now is 07:01 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.