Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   Mk2 ecort steering rack (http://www.haynes.co.uk/forums/showthread.php?t=7038)

poshguy 4th September 2011 01:08 PM

Mk2 ecort steering rack
 
Guys

Are the standard mk2 rack's ok or does the haynes need a quick rack.

What sort of money are people paying for the steering rack as i have an offer for standard rack that needs new track rods for £30 but i dont know if thats a good deal.

unless anyone knows where i can get a ood one from or has a spare kicking around there not in need of that would be great :D

rpjg1975 4th September 2011 04:27 PM

From memory I think I got my standard rack which wad reconditioned from eBay for about £40. New ones I know are on the Saturn website. Probably worth pricing up the bits to replace as I was warned off a similar one due to the costs.

Russ

poshguy 4th September 2011 05:00 PM

Thanks for the reply i was thinking about a recon 1 as this needs new trck rod ends and also is used and has just been taken off for a quick rack to be put on but to recon is going to cost just as much as buying a new 1

AshG 4th September 2011 09:11 PM

i have got a 2.9 ratio rack it was brand new only did a few thousand miles on my car before i changed it. it could pass for brand new if i was a dishonest guy.

only reason i changed is was because i wanted a 2.4 ratio which turned out not to be much of an upgrade tbh.

poshguy 4th September 2011 10:03 PM

ash you have pm

Enoch 5th September 2011 08:35 AM

The Mark 2's have different threads to the mark 1's. If you install a rack from a mark 2 you need to thread your track rod extensions accordingly. From memory the mark 1 was a unf thread and the mark 2 was metric - I think it was 12mm but it was a while back that I did mine now.

baz-r 5th September 2011 09:15 PM

Quote:

Originally Posted by Enoch (Post 64063)
The Mark 2's have different threads to the mark 1's. If you install a rack from a mark 2 you need to thread your track rod extensions accordingly. From memory the mark 1 was a unf thread and the mark 2 was metric - I think it was 12mm but it was a while back that I did mine now.

almost mk2 is m14x2 and thats what you want if you get a mk1 thay are 1/2unf and you will have to get your own extensions made or there was a co. that makes hd track rods of any length you want try deamon tweeks for supply

poshguy 5th September 2011 09:21 PM

Thanks for the info guys i will deffo be going for a mk2 rack i just noticed that some people when selling second hand mark them as escort mk1/2 rack so i wanted to be aware of the diffrences

baz-r 5th September 2011 09:42 PM

Quote:

Originally Posted by poshguy (Post 64110)
Thanks for the info guys i will deffo be going for a mk2 rack i just noticed that some people when selling second hand mark them as escort mk1/2 rack so i wanted to be aware of the diffrences

if you have an old escort its just the case of a set of new track rod ends to make the other type fit (mk2 rack+mk2 tre's fit mk1) :D


All times are GMT +1. The time now is 03:22 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.