Haynes Forums - Coolant inlet elbow gasket?

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)

- - Coolant inlet elbow gasket? (http://www.haynes.co.uk/forums/showthread.php?t=7047)

brainbug007

5th September 2011 12:55 PM

Coolant inlet elbow gasket?

Does anyone know where to get a gasket for the coolant inlet elbow? I've tried my local motor factors, ebay, & google and I've not found anything :(

flyerncle

5th September 2011 01:26 PM

Make one from thick paper and use something like Hylomar to seal it.

brainbug007

5th September 2011 03:31 PM

Cool thats a good idea, probly much cheaper than going to ford :) would something like cereal box cardboard work ok?

ayjay

5th September 2011 06:49 PM

Just make sure its KELLOGGS:D
Seriously- thats good advice and it works well

mark	5th September 2011 07:49 PM

Quote:

Originally Posted by brainbug007 (Post 64085)

Cool thats a good idea, probly much cheaper than going to ford :) would something like cereal box cardboard work ok?

I assume you joking?! if not then no you will need gasket paper from local motor factors cheap as chips, and no you cant use the paper your chips came in either :D

All times are GMT +1. The time now is 06:51 AM.