BEllhousing gasket?
 

I need to get the gasket that sits between the bellhousing and gearbox T9 sierra. The local ford parts cannot find it on gearbox screen and says it will be on engine screen. Problem is, I bought gearbox with other bits and don't know what engine it came off! Isuggested that it shouldn't matter but no good. Any of you guys know part nos or how I can find out.
cheers
tony

I would have thought you could put any engine really that had a type 9? Like a pinto or cvh?

Had a quick look on fleabay and is sounds like what you're after?
http://www.ebay.co.uk/itm/Ford-Type-...item2561881565

bearingkits will have one..

http://www.bearingkits.co.uk/

If anyone does.


But there's no point in one if there is one.

TT

I would try and make one first out of some thin card <cornfakes packet has always served me well). If it looks cats botty then buy one.

Bob

if it is the same pattern as the top right i can get you one done in work for nothing if you want.
my bellhousing is the same as this one:
http://www.ebay.co.uk/itm/Sierra-Cap...item3cbd174b89

thanks guys thats just the job,
cheers
tony