Haynes Forums - Handbrake cable

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)

- - Handbrake cable (http://www.haynes.co.uk/forums/showthread.php?t=7333)

misty

27th October 2011 01:44 PM

Handbrake cable

Hi All
has anyone got any pics of the handbrake cable attached to the chassis of the car as i am not sure where to put the cable

Wynand

28th October 2011 06:46 AM

Are you using live axle or IRS?

misty

28th October 2011 08:55 AM

live thanks

Wynand

28th October 2011 11:42 AM

Sorry, I have an IRS setup and pic would not really help then:(

twinturbo

28th October 2011 01:40 PM

Quote:

Originally Posted by misty (Post 67246)

live thanks

you sure? Haynes is IRS?

TT

misty

30th October 2011 10:09 PM

sorry bit of a senior moment there yes it is IRS

Wynand

1st November 2011 06:06 AM

Misty, since no roadster fellow builder comes to your aide, here are some pics of how I fitted the handbrake cable to the chassis, but I must mention that my chassis is a McSorley 442E and not a roadster, but should give you some pointers.

The fuel tank is mounted above the diff away from the rear panel for safety sake and you can see how I routed the cable to rear hubs.
Btw, my car has a raised opening bootlid (level with top of roll bar bases) and thus may seems strange on pics without it:eek:

misty

1st November 2011 08:51 AM

MANY THANKS that is just what i wanted ahh many thanks again

All times are GMT +1. The time now is 08:54 PM.