Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   BEC reverse gear. (http://www.haynes.co.uk/forums/showthread.php?t=7510)

shaun 6th December 2011 06:50 PM

BEC reverse gear.
 
Hi All, been helping a mate of mine finish off his car. We have put a ZX10 engine into an MK Indy he bought as an unfinished project of the bay. We have got to the stage where we have to fathom out a reverse gear, does anybody know where we can get the gear cut, or buy one ready cut. We have tried MK and they aren't really interested in supplying the gear.
Not really sure where to go from here.

Thanks

Shaun

mikemph 6th December 2011 08:01 PM

Here is a build of my electric reverse for my roadster

http://www.locostbuilders.co.uk/view...php?tid=154985

shaun 7th December 2011 04:07 PM

cheers, exactly what we are looking for.

thanks

Shaun

Tilly819 11th January 2012 04:09 PM

i have one of MK's reverse gears if you are intrested, also have a suitable starter motor. U2U if intrested

tex 15th January 2012 05:52 PM

Quote:

Originally Posted by shaun (Post 68643)
Hi All, been helping a mate of mine finish off his car. We have put a ZX10 engine into an MK Indy he bought as an unfinished project of the bay. We have got to the stage where we have to fathom out a reverse gear, does anybody know where we can get the gear cut, or buy one ready cut. We have tried MK and they aren't really interested in supplying the gear.
Not really sure where to go from here.

Thanks

Shaun

HPC gears wanted £122 for a gear cut iv just enquired for :eek:

use a MK4 golf starter

you will have to make a mount bracket for the starter and try to mount it in such a way that the solenoid on the starter doesnt stick through the floor too much - or mount it high of the prop if theres space

if you go through the floor just make a shield for the starter to
a. keep out the crud
b. maybe strong enuff to avoid hitting it


All times are GMT +1. The time now is 11:16 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.