Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Getting close (http://www.haynes.co.uk/forums/showthread.php?t=7854)

Peter-C 26th March 2012 03:31 PM

Getting close
 
1 Attachment(s)
Front with is only placed for effect, will have a go at fitting tonight.

Thanks to AdrianH for the loan of the exhaust system for IVA.

Hopefully there is an attachment.

adrianreeve 26th March 2012 06:53 PM

Looking good, although I do agree about the indicators.

Cheers

Adrian

Peter-C 26th March 2012 07:25 PM

Thanks lads,

I'll have another look at the indicators.

The can sounds quite quiet to my unexpert ear !! Is it tested at a percentage of full power ? I'll check out the place in Accy.

After taking hours to remove the bolts from the sump I couldn't get it off without removing the engine !! So I've had another go at fixing mine which seems ok now. Fingers crossed.

Peter-C 26th March 2012 07:46 PM

I've just checked the indicators and they are 365mm from the edge of the front cycle wing. Is that ok ?

Peter-C 27th March 2012 05:33 PM

Adrian,

Just measured the rear wings. They're wider by quite a bit. Another job on the list !!!

Peter


All times are GMT +1. The time now is 06:51 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.