Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Off subject (http://www.haynes.co.uk/forums/forumdisplay.php?f=12)
-   -   Mx5 Build guide (http://www.haynes.co.uk/forums/showthread.php?t=8635)

spud69 6th November 2012 03:46 PM

Mx5 Build guide
 
has anyone got a copy of the Saturn Mx5 build guide they could send me please, my original has gone missing: andrew.hugill@ntlworld.com

Thanks

TSM Locost 6th November 2012 03:58 PM

mx5
 
All Done, let me know if you dont get them.

Davidbolam 6th November 2012 04:02 PM

Are you going to start another build?

spud69 6th November 2012 04:25 PM

Thanks a lot Mike, hasn't come through yet but ntlworld (now virgin) can be very slow with larger files. Could you also try to: andrew.hugill@me.com - thanks again.

No David just need some measurements for a someone local, hopefully will be starting another but it will be an rx-8 based car (can always dream)

Thanks.........AndyH

spud69 6th November 2012 04:57 PM

It's come through, thanks a lot Mike.

AndyH

Big Vern 9th November 2012 01:36 PM

Quote:

Originally Posted by spud69 (Post 80023)
has anyone got a copy of the Saturn Mx5 build guide they could send me please, my original has gone missing: andrew.hugill@ntlworld.com

Thanks

I was just wondering where that had gone, I could do with a copy as well:o

skov 9th November 2012 01:52 PM

Here you go

(assuming you don't mind me sharing it Spud!)

spud69 10th November 2012 10:37 AM

Thanks Skov, no i dont mind at all. I know it's not perfect as didn't have time to finish it properly but it will make a good starting point for most people and is good to see it used. If anybody wants to update it then please feel free, after all most of us are here to promote the self build - much better than just bolting a kit together, even top gear lads managed to do that...........;)

Big Vern 10th November 2012 11:55 AM

Quote:

Originally Posted by skov (Post 80102)
Here you go

(assuming you don't mind me sharing it Spud!)

Thanks muchly Skov:)

GillhamOnline 18th November 2012 05:35 PM

Hi, Just to make you all aware that i have put a copy of Andy's build guide on my website under the MX-5 donor section (products to follow soon). I am currently updating a couple of bits so if anyone has anything that they think should be added to help other builders please let me know.

Thanks,

Dan


All times are GMT +1. The time now is 04:19 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.