Hoses
 

Hi all,
I'm about to start on my cooloing system.
But i have a question, on my pinto water pump, there are two outlets one large and small.
I know the large goes to the rad, but where does the other go to?

Terry

Thats the return from the heater matrix.

Bob

I take it i just blank it off then?

Thanks robo

Terry

I cant remember if the pinto has an internal bypass. if not you will have to loop it into the heater feed to for the bypass.

bob

Mine goes from there round the back of the block to the inlet manifold.
If you plan on using no standard carbs then give ashg a pm or look on his pics to see what he did. HTH