Boot is all fitted now
My next question is.....
When I take the car for a drive the level of the coolant goes up and doesn't go back down again. If I then bleed the system of air it goes back down.
The system is not loosing any coolant
I have the expansion bottle plumbed into where the heater matrix used to be. I have used a t piece and the connection has the same size outlet going to the expansion bottle as the feed going back into the engine. Could this be the problem?
__________________
Click to see my build photos on Flikr
http://www.flickr.com/photos/67112582@N03/
Saturn MX5 Based Chassis, Limited Slip Diff & 2.4 Quick Rack.
Build cost.... seems to be spending more on tools than car bits at the moment! (they will be handy in the future though).
Car iva'd and passed 15/08/2014. Finished weight 572kg.
|