Well here we go then Steve...first of all I sat down and thought What am I going to use.....mdf again....no, too heavy ....Ally... no, too wasteful.... I wanted something easy to work with.....standing in my back garden and looking at my roof (cannot remember why) and the answer was staring me in the face...FACIA BOARD the more I thought about it the more it made sense... hdpe with a return on the bottom that will stregthen that part. Another real bonus ....cost,
£13 for a 2.5m x300mm and leaves me with loads spare to experiment with.
I have also discovered it forms very easily with a heat gun so wheel arches and such will be easy to fabricate and a front splitter (you were right Paul)
Anyway first part I started with was my instrument binnacle, So this is a work in progress ....first pic is where it will be situated ie replacing these gauges.
