Quote:
Originally Posted by norton
Ah yes, I understand the weight of the car vs weight transfer, bumps etc will likely overcome the friction in the bush however, these bushes are bulging out of their intended home, something is less than ideal here I'm sure. At this rate I could probably run the shocks without any damping!
|
I dry assembled mine initially and the stiction on the rear was terrible. After the IVA I disassembled the lot and reassembled with teflon grease. The rear is nice and smooth now. If your bushes are buldging then you might want to check your tolerances or maybe there's too much grease in there?