Quote:
Originally Posted by TalonMotorFabrication
If you are determined to do every thing your self with an angle grinder (life is way to short for that by the way) then get a 2ft/600mm square of 3mm semi bright mild sheet and 1000mm of 50x5mm flat black this will cover the basic chassis...or if like many others you want wheels on your wagon before the apocalypse just buy a pre cut chassis plate kit, saves time you won't hurt your self every body has a good time,yay.
Wishbone material as a minimum for the lowers should be 25x2mm or 1" 14 gauge ERW comes in 5mtr lengths, buy 2 you will cock it up at some point (don't bother with CDS it is 3 times the price and you won't get much benefit from it) upper wishbones 20x2mm or 3/4" 14 gauge again comes in 5mtrs you'll need just the one, Mrs Wembley? (ask your Mum)
|
Thanks for the reply
First off i dont intend to hurt myself with the grinder ive been using a grinder almost daily for the last 15 years and no damage so far touch wood.
I also enjoy fabricating things from scratch.
Plus im in ireland so shipping will possibly be a problem.
Do you ship to ireland and what is the cost.
As for mrs wembley im lost.
Thanks again
Stephen