Body is off the donor and the rear end is dismantled, front uprights off and rest of loom, all that s left now is to get the engine off the front sub frame and that will be it done.
Could do with some advice on getting the rear half shafts out of the hub, I was all smug because the infamous bottom hub bolts came off with nothing more than a 750mm breaker bar and some WD40 but I can’t get the half shafts out of the hub, I wacked it good and proper and neither budged, I have removed the whole upright and tuned it up and filled the void with WD40, going to keep topping it up and hopefully that will do the trick.
http://s765.photobucket.com/user/dav...tml?sort=3&o=2
http://s765.photobucket.com/user/dav...tml?sort=3&o=0