lol it's called a sense of adventure .......
I did silverstone in her yee ha ( just make sure you add breakdown to the insurance )
Good luck making the panels I made my side panels from 1.5 steel marked out and cut to shape allowing for the return edges I then got a substantial length of 3x2 oak clamped it in place on the sheet corresponding with the top rail and started dolling along tedious it got there once that was done and the v notch cut to allow the bend I marked the diagonal fox this very technically was done by standing on said oak and pulling the bend by hand back on the frame mark the lower edge and do the return as for the top then make a carboard template for the wishbone mounts feeding rack exits once happy transfer and cut out
Sorry can't help with the back panel
Gary
__________________
remember we are not mad just creatively insane
|