Quote:
Originally Posted by geeman
Ok, well i just tacked in u1 and u2, but ive lowered tr1 and tr2 just abit lower than 355 to about 354, this means that the distance between u1 and u2 is about 359 not 361mm, but i dont think this will be a problem  |
the measurement of 359mm instead 361mm is critical but can be resolved.............
the position of U1 & U2 creates the angle & measurement of the upper rear suspension brackets ( front suspension ) , so when time comes when you fit these brackets be aware that the measurement change will need to taken into account
myself i would try to maintain the distance of 361mm between the uprights as it makes it easier to correctly place the suspension brackets.
hope this makes sense? the geometry of the suspension set up is a critical one as it affects various things.
happy building
andy