Quote:
Originally Posted by HandyAndy
yes i think they will, to be totally honest here, having met Ash G & knowing his technical know how etc i trust his advice totally (Ash  ) , i,m not a mechanically minded person & had the same concerns of "depth" of the hold on the rivets at that length, maybe Ash will respond with his findings from fitting his ali.
if in doubt try a test piece with different length rivets, i,m sure screw fix etc can let you have a couple of each to test & then place an order.
andy |
crazy fool. i just make it all up as i go along
i have used a few already testing my shiney new air powered rivet gun and they hold 2 bits of 1.5mm ali together fine.
im going to rivet my sides and floor on at the same time. i purchased 60 clecos to hold the pannels in place while i pre drill all the rivet holes then i will put the tiger seal on and rivet down.