Quote:
Originally Posted by HandyAndy
sorry for being late with the info, had busy day with my family celebrating my mum,s 80th birthday
measurements for you......
the CP15 plate that is on the outside(offside) is 120mm from the inner edge of TR2 along the TR9 rail, then you have the 40mm width of CP15 then a 60mm gap to the next CP15 plate.
i hope this makes sense & hope it helps 
cheers
andy |
Thanks!!! that will help me get the steering bits fitted. Ill probably do it on monday as i wont be doing any work tomorrow. Today i made the diff mounting plates, made plates cp10 and fitted them, fitted the diff, and then fitted the other wheel so the whole rear section is rolling
. I then wheel barrowed the chassis outside on the driveway and my neighbours finally realised what i was doing with al the metal and nosie in my garage.
also, the drive shafts were a tight fit, but nevertheless did fit. I also bought some swarfega from halfords as i was tired of dirty hands and it sucessfully gets rid of oil off my hand(mum was killing me for getting all the walls black
)