Seeing as I like a challenge I decided to use the loom from the donor.
The fuse box is a bit on the large side, but once the bonnet is shut you never see it was my thinking!
The loom is quite easy to strip all the bits out you don't want. Alot of it all plugs together, as is self contained sections. Only earths & power feeds might join to other circuits.
I just started at the connectors I wanted to get rid off and worked my way back to either a joint or the fuse box, and then cut the wire off. Started car & tried lights etc after each cut to make sure I hadn't cut something I shouldn't have.
Look at the attached picture to see how much of the loom I got rid of!!
Cost = Nothing other than a few hours work so far.
Mark
|