Quote:
Originally Posted by AshG
i really dont want this to be taken the wrong way but the wishbones are going to need grinding out and re-welding. from what i can see you havent got enough heat into them.
if you look at the front lower wishbones note that the ends are blue from the heat. you should be aiming for that all the way down the tube and on the plate.
what welder are you using?
sorry to put a bit of a downer on what otherwise looks like great progress.
i hope my comments are taken in a constructive way as i only want to help
Ash
|
hi thanks for the reply im using a kende mig with 0.6mm wire and co2
maybe i didnt have it set high enuff for the thickness of the plate and the tube?
Andy