Hello Dave and Others and thanks again for the comments,
All of the suggestions you have made are very positive and are all things we are looking, things take time though to be setup properly. Shipping costs will be prohibitive though with the templates.
With regard to the engine bay template, i have been asked this a few times now giving the measurements below from which a card template can easily be made. There is also a bonnet in progress with a larger and longer scoop for bigger engines, the work on the Single Seater though has delayed this - nearly done though. Measurements:
Front Frame to rear of nose / front of bonnet: 220mm, height: 200mm
Front frame to front of scoop: 380mm, height: 260mm
Front frame to rear of scoop: 710mm, height: 230mm
Front frame to rear of bonnet: 1220mm, height: 260mm
Hope this helps with your build.
regards....AndyH
|