Quote:
Originally Posted by davidimurray
That's brilliant - thanks for that information - if you don't mind I will make a little sketch and post up for other people on here. Do you happen to have an idea of the approximate radius of the bonnet corners as they sweep down. I'd like to try and see if I can squeeze my intake/airfilter under the bonnet.
Thanks again for that info.
Cheers
Dave
|
Have no problem you doing that at all Dave, i would have by now but just don't have time at the moment.
The bonnet radius is, approx, 120mm front and back and the bonnet meets the top rails at about 85deg.
All the Best....AndyH