Hi Davey,
TT7 is indeed 830mm with a 19 degree angle at the SB3 end,
Have you fitted TT1 into position yet? if so did you have a problem there?
If TT1 are correct then the only thing I can think of (presuming your BR rails are in the correct positions) is that you haven,t got the angle correct of the SB1,s (leaning back 17 degree,s), if that was out by a few degree it would shorten the distance between SB3 & TT4....( I also presume that TT4,s are the correct length?) , as you can see on page 45, fig 4.18 the TT7 rails rise up from TT4 to SB3.
HTH.
cheers
andy
|