when I get as far as the ali for the tunnel my plan was going to be, get some bolts and weld the pointing down on the inner edge of the tunnel and allow the ali floor to run on say 15mm so they are poking through hole's then make a piece of ali the same size as the tunnel and drill holes in in so the bolts come though to hold it up and then use nylock nuts and cut all the bolts so they don't sit proud. This way the prop is covered but with a few bolts your in and able to work on things
__________________
Even when I do something the same it's a little bit different lol
and don't forget to Drive it like you stole it!!!
|