Quote:
Originally Posted by rpjg1975
Hi andy,
I understood that they needed removing to remove the rear diff etc? Am I mistaken? Presumed it all needed stripping down when stripping the donor?
|
The only reason to remove the hub nuts is if you are intending to renew the hub bearings.
To remove the driveshafts from the diff all you need do is undo the brake drum backing plate & the driveshaft carrier from the hub, then the driveshafts will pull away from the diff, or if you have bolt in shafts you then just undo the bolts at the diff end & the shaft is then free.
hope this helps.
cheers
andy