Hopefully TT things should be reasonably straight forward
Early 1.8 zetec Mk5 Escort 105ps engine .... The loom I removed was from an identical car of the same age.
All plugs intact & well labled, so far so good.
My intention at the moment is to hook it all up as standard, ECU and all
So with a little luck, the only wiring that I will have to play with, will be the few wires that I cut that entered the drivers side bulkhead/fuse box
Once the engine is running .... I'll have a play with the inlet plemum & make one that is a bit more bonnet friendly.
If it all goes tits up it'll be plan B, C or even D !!
