Quote:
Originally Posted by jasongray5
Hi Baz.
If it were me personaly, I would want to know it was as near perfect as i could make it. However, you may want to consider taking off the suspension brackets, making your own jigs, and placing them on the chassis in the correct position? First thing I would do now, is have a measure up, and see if your suspension mounts are in the correct places.
Jas
|
lucky the suspension brackets have not been fitted yet
im mesuring +2mm both sides from br12 to br10 but parellel
br5,6,11,12 are parellel and square
and +8 one end of ff1 and +11 the other from br10 im thinking br1+2 are cut incorect instead of cut to fit
this is a bit worrying as the front suspension mounts fit off the frount frame and could have some pritty funky frount axel offset!
any i wasnt planing on building an indycar
