no its not normal.. It would be better to use a relay for higher current circuits.. If you want i can draw up the circuit for you for the lights? I would recommend you make a small area under the scuttle for relays.. A small bar mounted off the back of the scuttle will do.. Using this to mount all relays.. Keeps it neat. If possible keep as many of the electric components off the scuttle so that you can remove it if needed.. So perhaps the relays might be better on a passenger side under panel. My busa has a panel that is hinged above the passengers legs this mounts the ecu relays etc.. Wiring then goes on the chassis ONLY and not on the scuttle at all. Wires nip up to the dash panel where needed so working under the dash is easy.. Take off the scuttle.. 4 bolts inside the scuttle sides left and right.. Take out the dash screws.. Lift off the scuttle.. Leaves the wiring clear to work on! It is an aero screen so if you have wipers etc a multi plug would be needed to the motor.. Mount the washer bottle onto the scuttle.. The rush i had before had the wires onto the scuttle undersides.. NEVER AGAIN.. access can be really hard.
So to simplfy leave off the scuttle.. Then wire the car up with the dash "floating" your knees will thank you! Lol
|