Hi Filip
I have just measured my upper front wishbones & they are 249mm long .... Made as per jig.
They have been test fitted to the car & are fine .... Plenty of adjustment left & penty of rod end thread, engaged in the wishbone boss.
You are correct .... The drawing on page 61 does indeed show an overall wishbone length of 253mm ( Rounded up )
This has probably left you even more confused but to be honest, there is so much adjustment there.
4mm is neither here nor there !!
If you want more thread in the wishbone boss, make them 253mm.
I don't know if others have measured theirs ??
Hope this is of some help
|