Quote:
Originally Posted by twinturbo
Just read your build, Glad to see you did the shaft..
But the flex plate bolts may not hold up, if they are the same as the ones on my 24V's then the head is quite thin as it has little mass unlike a large flywheel.
TT
|
Flex plate bolts should be fine, they're high tensile and as for mass have you weighed a torque converter for a Cosworth V6? I have them tightened to the 65NM torque as quoted by Autodata for the XR4X4i 2.9 and they're fine.
D.