[Eternal]

Right its allmost fully welded missed a few welds in the inside and the underside. Started on the rear suspension stuff now so thats great! no twisting so far so ace news. Had to take it out the workshop to sand down the table just to make sure when i moved the chassis it would stay flat. When all the rear stuff, CP plates and other bits are done i will flip it over and do the underside/hard to get to bits.

While it was out the workshop i decided to do a little messing around! I have some real real rare 3pc enkei split rims. Problem is they are 5 stud and 117.5 and most deff the wrong offset. Its a shame as i would love to use them. Maby after the iva i can mess around see if i can do some hub work.