Todays job was getting my suspension brackets welded to the chassis. When i got to the rear of the car this evening i realised a stupid mistake i'd made on one of my lower wisbones...
I've welded one of the wishbone brackets onto the plate instead of a shock bracket!
Will the iva man be ok with a spacer each side of the shock in the bracket? Because grinding it off the plate won't be easy.
__________________
~
My Build Diary -
http://davesroadster.blogspot.com/
*updated 7/6/11*
Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.