Thanks for the help.
I want the seats mounting 75mm higher, due to the shape/thickness of the fiberglass (so i can see properly over the steering wheel) - so the box section won't be a problem.
My plan is to make a frame that bolts to the seats, then weld this to the runners, the runners will then be bolted to the box section which goes accross the footwell in the chassis.
__________________
~
My Build Diary - http://davesroadster.blogspot.com/
*updated 7/6/11*
Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.
|