Quote:
Originally Posted by Ifix
forgot to add this, It's worth bearing in mind that in a pre cut pack if you balls the welding up and have to remove a member chances are that when you come to welding it back in you may discover that its too short! then you'll have to muck about trying to find a little bit of steel to replace said part, as buying a 6m length for 200mm would be rather annoying
|
I,ve followed this thread & agree with you all of the ways that a kit can be cut etc, I,m the first person to support anyone who wishes to cut their own chassis, I try to help "Any" builder....
But with the above quote... I,d like to beg to differ.....
My chassis kits INCLUDE a spare length of steel cut to the longest length of each box tube size used in the chassis, so that if a builder makes a mistake they have the steel available to re cut a new section,
plus if a builder needs more steel to be supplied due to running out of "Spare steel", if the kit was purchased from me then they just need to get in touch & i,ll supply the offending part , ready cut for just the cost of postage.
I never try to "hard sell " my kits but like to offer full support to anyone who decides to go the flat pack pre cut route
cheers
andy