View Single Post
  #6  
Old 26th September 2010, 10:46 AM
flyerncle flyerncle is offline
Senior Member
 
Join Date: Mar 2008
Location: gateshead,near cobbly bit of A1 North
Posts: 3,188
Default

Production vehicles have vin stamped into the metal part of the chassis that is not readily/easily removeable for obvious reasons,Some have stamped a metal plate and welded it to the chassis and have passed IVA.

The tag on cars can be ally and in most cases have a plastic one stuck to B/post or door pillar and similar is placed in in the n/s/f lower corner of the front screen.

Tag has front and rear axle weight,gross weight and train weight and sometimes engine and paint/trim info.

A dremel or engraver might give decent results.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!


If at first you dont succeed,avoid skydiving...

No parachute require to freefall,only if you want to do it twice.
Reply With Quote