Quote:
Originally Posted by HandyAndy
Hi Ronnie,
TR5 is just an engine bay brace, on the original Roadster it was fitted & didn,t cause a problem with the engine used ( Pinto ),
so, almost all other engine fitments will require TR5 to be removed ( Mine included), but its worthwhile fitting some corner braces approx 8 inches in length between TR1 / TR2 to TR8, as these will work in unison as much as possible with TR6 & TR7 to brace the engine bay.
Hope this helps
cheers
andy
|
HAndy has got it spot on again - doesn't he make you sick......
Leave it off Ronnie till the engine is fitted then add a cross brace where it fits.
Regards....AndyH