Thread: master cylinder
View Single Post
  #13  
Old 6th November 2010, 12:48 PM
twinturbo's Avatar
twinturbo twinturbo is offline
Super Moderator
 
Join Date: Jul 2008
Location: Carlisle
Posts: 4,393
Default

Quote:
Originally Posted by rapidtornado View Post
can you remember where you got it from Andy? I need the same set-up as noted above (3 port) and I'm looking at £80+ for an m/c (all round discs) so will be getting that unless you can direct me to the 30 quid supplier

Cheers

All round disks on the sierra uses a 25MM Master Cylinder ( 3 port ) and you will be lucky to get one cheap.

You can probably use the standard disk/drum cylinder ( still 3 port ).

The reason for the bigger master cylinder is to produce more fluid in order to supply the calipers at the rear. Now, people that have upgraded to rear disks on the sierra have reported variably that it makes little difference to the pedal travel, or that there is some increased travel but it still works.

If you think about the above "Pedal travel" that "extra" can be dialled out by moveing the operating rod further from the pivot point ( so increasing travel ) This was not realy an option on the sierra as it would have required some reworking of the pedal assembly , so the cheaper option of a larger cylinder was used.

TT
__________________
You only get a woosh with a dump valve

Build Thread


Man Cave Mantiques



Cecil Street Auto Repairs Garage Carlisle




Build Cost £4181.65 - Last - Wheel Cylinders
Reply With Quote