Thanks for the replies but I'm still not happy. the first pic is the TRE with the rubber removed . The liitle ring around the taper is where the taper is cut on to the shaft. It a definite step and this step is inside the taper hole when the TRE is fitted. This means it's not sitting on the taper correctly.
Even when in the taper and remember this is without a nut on, it has very little movement. Again don't forget that there is no boot on.
Similarly the drag link without the boot shows how close it is to the top of the mushroom and why I can't ream out the mushroom any more. Again it has no nut on so will be even closer when done up.
Without the boot on it has little enough movement. With it on it'll have next to none.
