Iv already started it. but its abit more involved than the roadster
almost finished designing the front upright/hub front wishbones and front geomitery. Im not letting to much out because i want to make it abit of a surprise but its looking at being aprox the following
Prelimanry Spec
Front Track: 1446.8mm
Front Wheel: 7Jx17 E+50 Team Dynamics Pro Race 1.2
Front Tyre: 215/45/R17
Front Discs: 278mm x 25mm
Front Axle C/L from ground: 313mm
Rear Track: 1396mm
Rear Wheel: 9Jx17 E+30 Team Dynamics Pro Race 1.2
Rear Tyre: 255/40/R17
Rear Discs: ???mm x ??mm
Rear Axle C/L from ground: 317.5mm
Wheelbase: 2373.2mm
Track to Wheelbase Ratio
calculated from rear track: 1:1.7
Ground Clearance: 100mm
CofG Front/Rear: 40:60
CofG from front Axle: 1423.92mm
CofG from Rear Axle: 949.28mm
Target Weight: 600Kg Dry
Target Power @ Flywheel: 350BHP
Target Power to Weight: 583BHP/TONNE
Gear ratios:
1st: 3.583:1 38MPH
2nd: 2.038:1 66MPH
3rd: 1.414:1 96MPH
4th: 1.108:1 123MPH
5th: 0.878:1 155MPH
Reverse: 3.615:1 37MPH
Final drive: 3.824:1
Max Engine RPM: 7000
Steering Rack Speed: 2.4 Turns Lock to Lock
Steering Rack Travel: 50.8mm per Rev
Steering Travel Half Lock: 60.96mm
Steering Angle: +/- 30 Deg
Steering Ackermnan: 100%
tilly
|