Quote:
Originally Posted by brainbug007
Mine's like yours gaz, I went for the 151TE by clarke. So it sounds like it'll be ok on a 13 amp so long as I don't use it at full power? Did yours do ok on the thicker 5mm plate?
|
It's fine on full power. In fact I've welded most of the chassis on full power. It's only when you use it for a long run like the diff mounts that it'll blow a fuse. It got a good weld on the 5mm by going a bit slower and a little more feed. Chamfering the plate helps a lot.