As the economy seems to be in a bit of turmoil lately, & the purse strings are under pressure from all angles..........I,ve come up with a plan to help prospective Roadster builders spread the cost of purchasing a Flat Pack Chassis kit from me, after all, the title of the book is "Build a Sports Car on a Budget"
So hopefully this will help........
I will supply the Chassis Kit in 3 stages ( intention being to purchase 1 stage per month etc etc, might help keep the wife/partner happy
)
Stage 1 includes
Fully welded Front Frame
U1 to U8
BR1 to BR12
Spare Steel ( 2 sizes of boxed tube used in chassis & spare round tube if ordering the Ali rear tub frame spec kit ).
Also a few small lengths of "Scrap Steel" to practise on / set up the welding equipment.
Stage 2 includes
TR1 to TR9
SB1 to SB6
D1 to D13
SW1 to SW3
Stage 3 includes
RS1 to RS15
TT1 to TT12
RP1 to RP3 or
GRP1 to GRP2 dependant on choice of rear tub required.
This then allows the builder to make progress at each stage.
The cost of each stage is £80 plus £15 postage.
Admittedly, the cost over the 3 stages is £20 more than purchasing the full kit in 1 go, this is due to the cost of postage as the Carriers have a minimum charge per consignment but I feel the slight increase in cost is acceptable given that its spreading the cost of purchasing the kit over a period of months which makes it easier on the monthly household budget etc.
Chassis Kits can still be purchased as a full kit, the above just gives a builder the option.
Any questions/requests for info my email contact details are in my signature below VVVV.
cheers
andy