Roll bar IVA
Is there any particular spec for iva about the angle of the rear stays on the roll bar? Mine are going to be quite a steep angle, due to the location of fuel tank, pump and filter.
Also does each side need 1 bolt or 2? Ive read both answers when searching, in theory i'd like 2 to be safe, but space is tight.
Hope someone can shed some light.
Cheers
Dave.
__________________
~
My Build Diary - http://davesroadster.blogspot.com/
*updated 7/6/11*
Best bit so far: Getting it running
Worst bit so far: Cutting steel for wishbones and engine mounts.
Most annoying bit so far: Generator packing up half way through welding.
Last edited by David_17 : 16th February 2011 at 10:41 PM.
|