Any bolts used for any fitting should have enough length for a washer either side and enough thread through the locknut to be seen by Mr IVA.
For anything fitting the roll bar I used 10mm bolts,17mm spanner size and plated domed cap screws on the top plates and these are 12.9 tensile.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!
If at first you dont succeed,avoid skydiving...
No parachute require to freefall,only if you want to do it twice.
|