Quote:
Originally Posted by gaz05
I've welded in 8mm nuts as the book says. I hope thats ok for IVA or I'm screwed
|
You,ll be ok Gaz , as Mark says, those 8 bolts holding the roll hoop to the chassis will be as strong if not stronger that the welds around the suspension boxes ,
When I was fitting my rear back stays there was a discussion about how many bolts should be used to secure them to the chassis....some said 1, some said 2.....I,ve used 4 on each side so in effect I have 16 8.8 strength bolts holding my roll bar/back stays to the chassis....should be enough
cheers
andy