Quote:
Originally Posted by AshG
i agree with that to a point but having a really accurate chassis is always better. i did exactly what Ronnie described. my chassis was that good that i made and bent the side panels cut all the suspension holes etc out of the book and they fitted and lined up with the chassis perfectly. the thing that made me laugh is that when i told chris gibbs he informed me that the cad drawings for the side panels were never made or tested for fit
|
indeed it is, did a bit more welding on mine this afternoon and had a good measure to see how distortion had effected it, the only thing i have found is that BR12 has lifted a little (under 1mm) so have fixed some old wall ties to the table hooping over the bottom rails to keep them flat.
Cheers