Quote:
Originally Posted by Ashtonr
Has anyone got any drawings showing what to remove for the rear suspension / upright etc from the rear tub in relation to SB1 and D11 ?
|
Do you mean what you need to cut out of the rear tub GRP panel so that you can then refit the suspension/upright/wishbones?
if so, then fit the tub without any rear suspension on the chassis, cut out the GRP following the rear face of the SB1,s & the forward face of the D11,s, don,t go too high up to the suspension "box", ( approx 2 inches below the bottom edge would be about right ),
I,ll have a dig around & see if I can post up a photo of how mine was done.
cheers
andy