Here,s a pic of how I did mine,
I attached mine to the side of the chassis rail just above the upper shock bracket, you can see I,ve used some plastic tubing to run the wires from the headlight to the inside of the engine bay, tho you could also mount the bracket on top of the chassis rail so that the wiring could be run thru the bracket, tho you would need to cut a "notch" out of the nose cone if done that way, personal preference I suppose.
Yes, the small hole / plate is pointing upwards on mine.
Be careful on the width of the brackets as if set too long they will fowl the front wings when on full steering lock ( with headlights mounted ) , the center hole of my brackets are 120mm from edge of the chassis rail.
Hope this helps.
cheers
andy
