As Steve says a few have done this and passed IVA,Spuds car has a standard setup and went through fine,Sierra m/cyl and disc/caliper front and 10 in drums rear,as far as I remember no reducer valve.
If they use a roller brake tester with axle weighing facility (and I am fairly sure they all do)there are calculations as to weight and balance and pedal force used.
Someone who has a car passed will tell you better and I think Adrian H has put this on the forum previously.
__________________
Cost : Little as possible.
Thanks : To those who by their generosity my build has progressed.
Its a handmade sports car not a flaming kit car !!!
If at first you dont succeed,avoid skydiving...
No parachute require to freefall,only if you want to do it twice.
|