View Single Post
  #8  
Old 13th June 2011, 08:08 AM
Enoch Enoch is offline
Senior Member
 
Join Date: Nov 2009
Location: Near Boston, Lincolnshire
Posts: 788
Default

Check you have 12 v on one side of the coil - the ignition amp also needs a 12 volt feed on it - can't remember which wire. I had missed this at first and got no spark as a result. If you have 12 volts at 37 and 57 of the ecu and your earths are ok it should spark. You need to make sure the ignition amp is earthed.
Best of luck,
Dave.
Reply With Quote