Been a bit of a go slow lately.....this time of year I have to dabble with my other passion....my garden, but just recently I decided it was time to start getting some of the refurb work done, so I started with the hubs (easiest thing to get off the sierra first.
So we start with this
Having checked for ANY play in the bearings both on and off the car, I concluded that the bearings were fine and would leave alone, so the dust cap stayed in place until the de-rust was complete. I had bought some washing soda to do the electrolysis doofa .....but on having a good inspection of the hubs the rust was in its first stages of flaking so I decided to go at it with a hammer and old screwdriver and it came off very easily....about an hour saw the heavy stuff, off now out came the 3 dremels with different grindstones in them to get in all the nooks and crannies, another hour later and it looks something like this
Prising the dust cap off the insides look as new as the first day they were made, the dust caps were totally fubard so I made my own replacements (see thread in another article for that)
